Red Herring Full Stock For Bolt Primed Configs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parralaxaint and Vanishing pointnot.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stock that allows bolt prime red herrings to properly get a stock hold and to be able to prime the blaster while doing so.
There is 4 4-40 screws to secure the buttplate.
The 4 screws that secure the stock to the rest of the blaster needs a long screw driver.
You need to remove the old buttpads to install this.
Pictures are included to give a rough guide on what is supposed to go where.
Pairs well with the reinforced bolt mod I posted here as well.
Hardware-
The 4 holes that secure the stock can use either #6 screws (like the original, but needs drilling to widen the top 2 holes on both sides) or 3/4 inch #4 4-40 screws (like mine is but the screws are a super weird ass size) You will need to tap 2 new holes for the top screws (easy with coarse threaded screws that start it for you).
2 extra 4-40 3/8 screws (the standard slug ones)
A decent length of 3-32 elastic
A long boi screwdriver (8+ inches)