Artemis II mission patch (no multicolor)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Artemis II mission patch, for single material printers.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 22
- Makes
- 2
- Views
- 143
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BACKGROUND
Wanted to create simplified Artemis II mission patch suitable for single material printing, also with option for glowing Earth, so there you go!
CONTENT
AII_front_black - main frontal part of logo
AII_moon
AII_red - all red elements
AII_white - white elements
AII_earth - Earth file. To be printed as one element with printing pause added for material switch from blue to white. Use transparent blue material if you want to go for illuminated Earth version.
AII_earth_clouds - 1st part of Earth it you don't want to print it as one file, as mentioned above.
AII_earth_water - 2nd part of Earth it you don't want to print it as one file, as mentioned above.
AII_back_black - if You want to go for illuminated version or hand it on the wall, you need to print that back plate.
AII_plug_black - plug for wire openings
PRINTING & ASSEMBLY INFO
No glue needed for the assembly, all pieces should be easily pressed into position without any additional tools.
I recommend PETG as I used it, but PLA probably will also work, just Earth has much tighter fit, so there PETG will be needed, or anything less brittle than PLA.
For illumination I've used cheapest Christmas Lights you can find. Cold white works best.