Improved Wall mounted Multiple Mechanism Auto-Rewind Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quieter auto rewind which permits continuous reverse rotation to spin filament back on spool and modular track lengh
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remixes the original models with 3 Goals in Mind:
Modular length of the rod (rod lengh modular in spool rotations)
Quieter when the rod is fully extended (print the end part in a flex filament)
Permit to rewind the spool, even when the rod is fully retracted, but use a spring to keep it normally operational. Use a spring from a pen to make it readily available.
You need to print
From the Multiple Mechanism Auto-Rewind Spool Holder (https://www.printables.com/model/3729-multiple-mechanism-auto-rewind-spool-holder/file ) everything but the base and the rod
From the Wall mount for Multiple Mechanism Auto-Rewind Spool (https://www.printables.com/model/8750-wall-mount-for-multiple-mechanism-auto-rewind-spoo/files) the wall mount
From this model:
1x ShaftWithSpring (PLA)
1x TopEnd (PLA)
1x BottomEnd (FLEX for a more quiet operation, otherwise PLA)
0-1x HalfRotation per half rotation of the Spool your want for automatic rewinding (PLA)
Xx FullRotation per full rotation of the Spool your want for automatic rewinding (PLA)
Additionally you will need
Two 3x10mm screws and nuts as described in the Wall mount model
A counterweight as described in the Auto-Rewind Spool Holder model
The spring of a pen (mine is 21 mm long)