1 / 1
Niu KQi1 Pro handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As there is no good place to put a lock on the Niu KQi1 Pro I created a handle for to put a lock in.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As there is no good place to put a lock on the Niu KQi1 Pro I created a handle for to put a lock in.
This might not be the most secure way, but it's better then nothing. I recommend to print it from a very strong material like Nylon. You can put hot glue in the screw heads to prevent them from being easily removed.
To print simple split the model in halt (at 23mm) and print the two halfs separately.
You will need:
2x M4x40mm screws
2x M4x6mm screws
4x M4 nuts