Counting matching models…
This model was featured on The 3D Printing Nerd Be sure and Check out this awesome video by 3D Chill with super clear assembly instructions ! We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 Inspired by benzz88's…
Millennium Falcon Scale 1:500
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Original part : https://www.thingiverse.com/thing:2815721/files
I stumbled across this awesomely detailed Millenium Falcon surfing the net one night. I believe it was extracted from a game, as it was in some obscure file format. I've tried my best to convert it here in a couple of file formats. But it…
Updated Version to my previous design. (simplified the design and edited some geometry to make them fit universally) A set of easy to print and use nuts for 20-Series and 30-Series extrusions. There are 2 types and 3 mounting options:…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
An awesome video from the 3dprinting nerd! Here is a link to detailed instructions: https://docs.google.com/document/d/1KDRXu7u-fEv7_Fu8X6EB74nruDYoBuEng44OES5XB0Q/edit?usp=sharing Print Settings Printer Brand: Bambulabs Printer: Bambu…
Alignment pegs guarantee precise positioning during assembly. All components are printed without any support, raft, brim, or infill. Printing at the standard size produces a model with dimensions approximately 131mm wide by 191mm long.…
This is a 10 cm by 7.5cm model of the Millenium Falcon. Easily printable, prints best with support on the underside. Print with the bottom of the ship on the bottom of the bed. Happy flying, Rebels! Print instructions Category: Models…
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…
A simple cable clip for use with 4040 extrusion. Once printed, fit the small section into the extrusion t-slot, and then twist to lock into place. Should be a tight friction fit when in place. A side opening on the clip allows for a…
These are the print files so that you can print and build your own Simplified Millennium Falcon “Brick” set! I've included a .3mf file that I used to organize all of the print files by plate/color and scaled mine up to 400% of the…
Ok I have managed to get the Falcon created by Jace to print, I am not sure why - but for some reason (possibly the file size of 103MB) it is not showing in the preview images. However it should be in the file list. I will update this…
Round version of the eye is added Project file added G-code file added
Custom bracket to mount the UCS Millennium Falcon 75192 to the wall in a vertical position. All other ways I've seen to mount the set in this position have used wood and the final versions were not perfectly secure. This 3D printed design…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…
Modified for 5mm wide slots, otherwise it's the same model. prints without support, and works best in PETG
Inspired by fixumdude’s Snowflake Tie Fighter , I downloaded Maxime’s Millennium Falcon model on GrabCAD, modified and redesigned it for better printability and added a snowflake cutout, using a snowflake design from Lia Aramburu . If you…
Bring balance to the Force and your windowsill with the Millennium Succculum — a 3D-printed succulent pot inspired by the legendary starship itself. This compact freighter-turned-planter is perfect for housing your bravest little…
Found this made by someone in a facebook group, no stls so here you go. edit: as some people have mentioned, some parts are not to scale, please scale the tiny parts by 1000% This took me a while to put together so please feel free to…
EDIT: I added a RAR with all files in one!!! A small collection of aluminum profiles to print adapters or other things for your printer. If you can use it please leave a like there. Please support me and leave a like there. It's just a…
Bring the galaxy's most legendary smuggling vessel to your desktop with this incredibly detailed Millennium Falcon 3D print STL model! This iconic starship figurine captures every surface detail and panel line of Han Solo's beloved…
Fan of the Millenium Falcon, I designed this keychain with Fusion 360. It is 6.5 mm height and 45 mm lenght. As you can see I mixed white and black filaments. For those who wants to edit this project you will find the .f3d Autodesk Fusion…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
Linear Connector for 2020 Tslot Aluminium Profile M4 Thread Two models available: Standard - Heavy Duty Suitable for: Update 15/04/24 - Added Reinforced Type 15/07/2025 - Added REV1 versions - Geometry cleanup All our designs are free to…
I was inspired by the millennium falcon tube holders from AtomicVirology (https://www.printables.com/de/model/114530-millennium-falcon-tube-holder-improved) and CFell…
🚨 FUNDING GOAL REACHED – THANK YOU! We’re thrilled to announce that we’ve officially met our funding goal for the Millennium Machines Milo V2 launch. Your support made this possible — and we couldn’t be more excited to take the next step…
2020 Slide In Connector for 2020 Tslot / Vslot Aluminium Profile Suitable for: All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave a like. Thanks!…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
Thanks to vladua for the great wind turbine. I enlarged the wind wheel to a diameter of 170 mm and a height of 196 mm and adapted it to my proven bearing for an 8 mm metal rod. The wind turbine parts can be put together without reworking,…
Modified Fillenium Malcon in TinkerCAD: added rear thruster stabilizers (if that's what the little vertical fins in the back are called) changed the angle of the forward wedges to be more realistic; the original Fillenium Malcon had them…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…
This is just a simple, lowpoly model of 2020 V-Slot Aluminium Extrusion/Profile. Designed using the dimensions from the attached screenshots. Have fun using it in your own projects :-) Category: 3D Printer Parts
My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…
2020 T-Slot 45_90 connector Hidden Mount Aluminium Profile Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
Update! I made a new version with even more compatible extrusion types: https://www.printables.com/model/493621-aluminium-extrusion-nuts-and-t-nuts A set of easy to print and use nuts for 2020 and 3030 extrusions. There are 3 types:…
4040 Tslot Aluminium Profile plus Accessories for profile system Adjust the Z scale to obtain longer profiles ( 4040_Tslot_Aluminium_Profile.stl) Accessories for 4040 profile system 4040_T-slot_Nut__Aluminium_Profile_M4…
I got the dark millennium falcon (75389) and wanted to mount it flat on the wall like my other version. They changed the landing gear on this set which did not allow me to use the existing mount design. This allows it to be mounded at…
Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this first model you can have the brain of…
I couldn't find this exact model here so I brought it over. https://www.thingiverse.com/thing:919475 Photos are Prusament Galaxy Silver PLA.
I love sim-racing, but I also want all the cables neatly tucked away. That's why I designed a clip that can easily slide into the rails of any type of aluminum profile. Once inserted, you can rotate it 90 degrees to secure it in place.…
They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling
Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…
60x60x20 corner bracket that will accept M3 screws. Prints flat without supports.
The idea with this mod is to rotate the bed 90°, so that the bed wires come out the front right side instead of the back. That way, they can travel over the case rather than behind it, allowing the printer to be pushed back closer to a…
"She'll make point five past lightspeed." ―Han Solo The Millennium Benchy - for those looking to add a bit of the force into their prints. Print at a 45 Degree angle, balanced off the flat part of the tail as shown in the photos. My model…
a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…
This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…
This is my version of the Millennium Ring from yu-gi-oh, it's roughly to scale but is made to look good in person and be easier to make. I included a few different ways to print the pieces some are easier than others depending on your…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
I first created this model when a friend wanted a Millennium Rod for his cosplay. I saw a few models around but did not like how they went together. I also wanted to add an LED so the eye glowed. I made this model from scratch using…
Halcon Milenario | FILLENIUM FALCON easy print easy assemble pretty big enjoy but please like if u liked lol
Adjusted to print with max 0.6 nozzle in vase mode Category: 3D Printer Parts
I saw a sign like that but it had weird grammar so i made my own with text i liked more.
https://www.thingiverse.com/thing:4665052 provided a single piece model that was too big to print on Prusa MK3S, so a cut the model using Shapr3D on my iPad and added assembly points, supports, and cross-bars that use M3 screws and nuts.…
3D printable LOGO of Millennium school LOGO and Veritas Club LOGO form BLUE ARCHIVE
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
Cranium and mandible of the Visible Human Female segmented by me from a computed tomography (CT) scan. I downloaded the “Aligned CT Dicom” provided here under CCBY 4.0 license and segmented the cranium and mandible separately in 3D…
A stand for the Lego Millennium Falcon, remixed from https://www.thingiverse.com/thing:4790242 to fit on a Prusa i3 M3s+ buildplate. Basically I removed 1mm from both sides of the base, which doesn't really effect anything. If you are…
Used for connecting two 2020 aluminium extrusions. Holes are for M4 screws. Can be printed with draft 0.3 mm profile. Lock the measures and type Z: 100 mm if it loads larger. Print horizontal without supports.
Do your midipreps using the fastest hunk of junk in the galaxy. This tube rack holds 50 mL conical centrifuge tubes ("falcon tubes"). The base and attachments have been redesigned so that the model has minimal supports and it clicks…
Check out the detailed guide over at 3dprintbeginner.com! Edit 2021-04-14: Drill guides updated to allow improved clamping. Just thread an M3 or M4 screw through two or three of the roller wheel holes to fasten the jig securely against…
Nuts for 2020 Aluminium Extrusion, T-Slot Nut and Hammer-Nut (Drop-In-Place) for M3, M4 and M5 Screws.
Hello guys, this is a Fanatec clone designed base setup for the FFBeast wheel DIY project. On the backplate i used a XT60 socket and a Type-C USB port. I have a 2080 aluminium profile version too but i need a little time to finish it.
I wanted to have a Millennium Falcon Key chain but all of the key chains had bad details so I decided to make my own.
Fan of the Millenium Falcon, I've already designed this keychain but this one include a shopping cart token . It is 6.5 mm height and 45 mm lenght. The print is in 3 parts : millenium falcon keychain token corresponding to 1 euro coin to…
3030 Linear Connector for Tslot Aluminium Profile M4 Thread Two versions: Standard Type Reinforced Type Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may…
Maid of Favonius. Noelle. Genshin Impact.
A simple keychain made of the Millennium Falcon.
As part of a project I undertook to DIY (design-it-yourself) a modular EggBot-style robot from scratch using some parts I had on hand, I decided to use T-slot 8020-style profile as my base to allow for adjustments. Two issues were…
An angle connector (90 degrees) for V-Slot and aluminium profiles of types 2020, 3030 and 4040. The model is parameterised (.f3d file included). The holes are designed for M4 screws. I use M4x8mm screws and M4 hammer nuts to fix the…
I have created a model of 2020 aluminium extrusions as I had found it difficult to find a clean model online so to make it more convinient for others I had mad a simple stl file of an aluminium extrusion. If you want to build a fully…
These profiles were fine tuned for the Sidewinder X1 and Artillery Genius. These should be good for most machines which use the stock extruder assembly. With some small tweaks, the same profiles should work on upgraded machines. Because…
Do you love Star Wars and Star Trek but cannot decide which ship you want to print. Why not both at the same time with the Millenium Enterprise I was shown a drawing by a good friend and I knew I had to make it. You can see the drawing…
3030 Tslot Aluminium Profile 4 sides open Adjust the Z scale to obtain longer profiles All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx
Replaces the factory control knob with something much cooler and easier to control. Print instructions Print the Falcon standing up with supports on build plate only and a large brim of at least 5 mil. 100% infill - Prusament Silver PLA…
Modified for 5mm wide slots, connects 3 corners. Prints without support, and works best in PETG I've printed mine on Pla+ and it works quite well
Unofficial printable model of a Denis Wick SM4XR (Steven Mead series) for euphonium, with a large shank. To achieve the best print quality, place the mouthpiece on the print bed with the shank facing down. Utilize support material and a 1…
The use is similar to some of my other models, like the Self Centering Gauge , Self Centering Drill Guide , or Compact Self Centering Gauge . About the model This is a drill guide specifically for extrusion profiles to get a centered hole…
The original one is very good, but I preferred to move it on a support more towards the back of the stand so that the millennium falcon is more centered, I find it prettier visually.
Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.
⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…
Artillery Genius / Genius Pro / X1 / X2 - Media Port Covers
slight remix (just organised per plate) of original for Box and cutter for various kitchen foils/films . Sizes organised per plat for 330mm and 390mm depending on what size you need
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs. EDIT 2020-12-12: The first version of this duct was completely…
This Helix Wind model has been modeled to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was developed to test…
Made my ones out of black ABS with 0.2 layer hight. They work fine for allready 2 years under harsh conditions. would not recommend PLA therefore. Dont forget to apply new sealant under the caps during replacement.
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
T-Slot Connector Hidden Mount M4 Thread 3030 Aluminium Profile. Suitable for: Resize to adjust dimension ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may not always fit…
Easy to print, don't need support.
This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.
Decided to make a simple wall mount in OnShape for an old Millenium Falcon lego set I've had collecting dust for years on a shelf. Lego Set 75105 This was intended to be a rough draft but it worked well enough that I didn't bother making…
Bed leveling adjustment wheel nut lock Developed by MAXPROBE for Creality CR10 Smart Pro printers with the red metal leveling wheel nuts. These wheel locks are low profile and prevent the bed from self-adjusting or being accidentally…
Since my original Creality end caps didn't stick anymore after taking them off twice, I needed new, tightly fitting caps for my printer. These did the job. If they don't fit snugly after printing, wrap a single layer of clear scotch tape…
