IFS Bowden Manifold Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bowden tube manifold for 90 degree mounted IFS on Flashforge AD5x
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm using the 90 degree IFS adapter for my AD5x, and was noticing some bends being made in the Bowden tubing that was breaking the ASA CF I was using. I decided I wanted a vertically oriented Bowden connection that clipped onto the IFS.
This is a simple add: unclip your IFS plug, drop the hat on the IFS and let it clip into place. the tubing will need to be cut for the insertion into the top of the manifold, and it will need to be cut pretty precisely to ensure a proper curve in the tubing. This will require the 10mm Bowden connection threads, and on mine, you'll see my printed model had holes just a little too large. I used a tube of gasket maker to add some gasket to the threads and hold it in place. I have adjusted the diameter down to permit the fittings screwing in, but please give feedback if they are too large.
You will likely need to take a small 2mm drill bit and easily open up the hole in the guide. Depending on tolerances, it can print just a little too tight. The Bowden tubes are a snug fit inside of the top part of the guide. If you easily grab them with needlenose pliers, you can guide it in there.
Items needed to complete assembly:
4 x 10mm diameter thread Bowden adapters
Needlenose pliers
Extra Bowden tubing
***You may need***
Strong adhesive if threads wont grab the plastic
2mm drill bit for opening filament hole slightly
***Downloads on other platforms greatly appreciated***
Makerworld → https://makerworld.com/en/models/2665131-ad5x-ifs-bowden-manifold-adapter
Creality → https://www.crealitycloud.com/model-detail/69df9930043ef052a5254c06