Batman Bat-signal Lamp - Easy Print and Assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Lamp that looks like the bat signal from Batman
- Rating
- 5 / 5
- Likes
- 98
- Downloads
- 323
- Makes
- 1
- Views
- 1,409
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update May 4th 2026: Added some other versions of the Logo. Also added an image I got from Reddit that has the evolution of the batman logo. Let me know if you want me to create any others from that list.
The Bat-Signal | Desktop Spotlight & Prop
Bring the Caped Crusader’s iconic distress signal to your desk or shelf. This multi-part 3D printable Bat-Signal is designed for easy assembly and features a hollow housing perfect for adding an internal LED light source.
Features
Articulating Mount: The signal housing sits on a pivot mount, allowing you to adjust the vertical angle of the beam.
Modular Design: 5 separate parts designed to print with minimal supports.
Cable Management: Includes a discreet notch in the base/housing for wiring a LED puck
Assembly Instructions
The Base: Start by mounting the U-shaped bracket onto the octagonal base plate.
The Signal: Place your light source inside the main cylindrical housing cap.
The Pivot: Secure the housing into the bracket using M3 screws or printed pins (depending on your print scale).
The Lens: Snap the Bat-Emblem ring into the front of the housing.
Seal it up: Use the rear cap to enclose your electronics and keep the light focused forward.
Recommended Print Settings
Material: PLA, PETG, or Matte Black PLA (for that authentic "Dark Knight" look).
Layer Height: 0.2mm for general parts; 0.12mm or 0.16mm for the Bat-Emblem lens for better detail.
Infill: 15-20% (Gyroid recommended for the base to add a bit of weight).
Supports: Minimal supports may be needed for the U-bracket overhangs and the main housing cylinder.
Materials Needed
Hardware: (2) M3 screws or 3mm dowels for the pivot points and (1) M3 screw for mounting the bracket to the base.
Electronics: Small LED puck light, 5V LED strip, or a standard tea light (for display only—be cautious of heat if using non-LED sources).
Note: If you enjoy this model, please consider sharing your makes! I'd love to see how your Bat-Signal looks illuminated at night.
Please note I don't consider this a remix because I remade everything except for the bat itself, but I got the original model from https://makerworld.com/en/models/1022357-batman-lamp-kit-001?from=recommend#profileId-1004009