X-Shot Piston Pump Barrel Shroud connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This piece attaches your barrel shroud without hurting your barrel collet
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 25
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a part that connects a piston pump (or any other) barrel shroud to your blaster without having to screw directly into the barrel collet.
It is styled like a rail panel and could be used for that instead. To install take the piece and position it like how I have in the photos, then put your m3*30 bolts through and screw them into your m3 nuts. You should be done.
IMPORTANT: YOU MUST PUT THE PART IN THE SAME ORIENTATION WITH THE OVERHANG DOWN YOU ALSO HAVE TO SET BRIDGE SPEED TO 10MM/S AND BRIDGE FLOW TO 1.5 OTHERWISE YOUR PART WILL BE WEAK WITH BAD OVERHANGS NO SUPPORTS
uses like the platypus rail seed