Tool Battery Charger Mount Templates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Templates for mounting various power tool battery chargers with #8 cabinet screws.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
These are not mounts. I did not trust that PLA would have strong enough layer adhesion to make proper mounts, so these are just templates for use with #8 cabinet screws. I used GRK screws, but most other brands should work.
The Kobalt mount is a bit of a tight fit on the cabinet screws. Just push it on, they are aligned, but the holes on the charger itself is a little smaller than most other brands.
As for every other brand, just tighten the screws until you can't easily pull the charger off the mount. This is a non-issue for the Ryobi, but all the sliding ones need a tighter fit to stay put.