Dell 5R10N/6TDVN Supermicro Chassis Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount & IO Shield to mount a Dell 5R10N/6TDVN SAS Expander into a Supermicro chassis.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a mount to put a Dell 5R10N/6TDVN SAS expander into a Supermicro CSE-826 chassis. I made this to mount the SAS expander in the factory standoff locations of the Supermicro chassis. This was so I could build a DIY JBOD.
It can likely work in other Supermicro chassis, but the CSE-826 is the one I had on hand. To mount this in the CSE-826, the rear-facing 2.5" double drive cage must be removed.
The mount screws directly into the motherboard standoffs. To mount the SAS expand to the mount, 4 M4*8*6 heated inserts were put into the 4 posts. I had to use the longer heated inserts to account for the longer M4 screws I already had on hand.
I printed this out of Polymaker PETG. It made some sense to print out of a material with a higher glass transition temp. PLA could maybe work, as its not coming into direct contact with very warm parts, and will have a good amount of airflow due to it being in a server chassis.
