Dell 5R10N/6TDVN Supermicro Chassis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount & IO Shield to mount a Dell 5R10N/6TDVN SAS Expander into a Supermicro chassis.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount to put a Dell 5R10N/6TDVN SAS expander into a Supermicro CSE-826 chassis. I made this to mount the SAS expander in the factory standoff locations of the Supermicro chassis. This was so I could build a DIY JBOD.
It can likely work in other Supermicro chassis, but the CSE-826 is the one I had on hand. To mount this in the CSE-826, the rear-facing 2.5" double drive cage must be removed.
The mount screws directly into the motherboard standoffs. To mount the SAS expand to the mount, 4 M4*8*6 heated inserts were put into the 4 posts. I had to use the longer heated inserts to account for the longer M4 screws I already had on hand.
I printed this out of Polymaker PETG. It made some sense to print out of a material with a higher glass transition temp. PLA could maybe work, as its not coming into direct contact with very warm parts, and will have a good amount of airflow due to it being in a server chassis.