Denver Broncos logo no MMU needed

Denver Broncos logo that you can print the colors separately.  You don't need a MMU.  Print the colors separately.  I made it so everything is the same height.  I you want white and orange to be taller then just scale them thicker.  I will warn you  that anything less than about 10" from mane to nose and the eye will be very small and difficult to put in place.  I rotated the model in the y direction 180 degrees so it prints the face on the bed.  I used a textured sheet because I like the effect.  If you do that the blue will need to have supports and a support blocker( I used a 4mm cylinder shape in Prusa slicer) around the eye so the filament does not melt  around the eye and make the support impossible to remove.