1 / 4
hanging closet bin for unused space above clothing hangers — image 1
1 / 4

hanging closet bin for unused space above clothing hangers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a light-weight basket/bin I made to hold some socks. It fits in my closet above the clothes hangers.

Rating
0 / 5
Likes
11
Downloads
19
Makes
0
Views
182
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution — NoDerivatives

This is a basket/bin I made to hold some socks. It fits in my closet in the unused space above the clothes hangers.

It can be attached using double sided tape or using screws. Be careful with screws because the back panels in these closets are often made from very thin wooden panels. I used double sided carpet tape cut to size.

The size is 300x200x180mm. About 95 grams.

Printing

I printed this in Jayo PETG on an SV08 using a 0.6mm nozzle. I slowed down the acceleration/speeds a bit to prevent printing issues because an earlier attempt (with much thinner walls) had printing problems because the machine was shaking too much.

I did not need any supports to print this. Print it with the closed flat rectangle side on the printbed, as shown in the picture on the table. It doubles as a brim during printing. Set walls to 5 and/or infill to 100% to get the max rigidity.

This will not print correctly on a bedslinger!

Tags