Gamo Swarm Maxim Gen 2 Loading Mechanism Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the Swarm Maxim 10x Gen2 Pellet/Air Rifle from Gamo.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Replacement pin for the loading mechanism on a Gamo Swarm Maxim Gen2 pellet rifle. This is the pin that pushes the pellets out of the mag and into the barrel chamber.
Printed in ABS (PLA would probably work, didn't test it)
90* Bed Temp
245* Nozzle Temp
Print orientation was to have the bottom have both sides of the channel along the length of the pin touching my build plate.
100% Infill
I had supports enabled to ensure part didn't have any warping due to cooling unevenly and peeling up, and to help with the nose cone staying uniform.
Model can use light post print sanding, I used a mini engraving pen/dremel bit to smooth out any bumps, especially around the tip, and to smooth out the channel along the length of the pin.
