Modular Plant Support remix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.69 net (excluding VAT)
For file: PlantSupport_3_0.4n_0.2mm_PETG_COREONE_25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modular Plant Support with modified 3-lock system
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 1
- Views
- 150
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I like Tomek Zimoch’s design, but the lock system didn’t work out for me.
I modified the plant support by moving the connections to less brittle areas.
It was printed using Spectrum Filament PET-G Premium Glassy with a 0.2mm layer height, no infill, 2 perimeters, 5 top layers, and 4 bottom layers.