1 / 3
Binary Clock with ESP32 and addressable LEDs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Everything for an ESP32 binary clock
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A binary clock made with an esp32 and addressable LEDs and an AP interface to set the time and change the colours of the LEDs
You will need
An esp32 dev board
A strip of 17 ws2812b LEDs cut in to 2 strips of 6 LEDs and 1 strip of 5
A usb power supply
Some filament, I used black pla for the back and clear PETG for the cover
To install the arduino IDE on a pc to programme the esp32
You will need to install the following libraries on the arduino ide
FastLED
ESPAsyncWebServer
AsyncTCP
data pin for led strip is connected to pin 5 on the esp