Tiny Driver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini stubby screwdriver made from 1/4" short bits.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Just a quick mini stubby for when you need to get at a screw and have VERY little space to do so.
I made this set from a cheap $5 set of 10 1/4" bits from the hardware store.
Prints just as it is, and I'd recommend fitting the bits in there while they're still hot off the build plate, or you might need a C clamp to "persuade" them after they cool.
I printed these in matter3d black PLA with D3D sigma "gold" for the trim. 4 perimeters, 4 top and bottom, adaptive cubic 15% Tested in the workshop and work as intended for what I needed. a fine addition to your toolbox for those rare moments they'd come in handy and nothing else will do.