Adventure Force Nexus Pro X Sled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nexus Pro X pump sled replacement, this model has DIFFERENT picatinny. Original pump handle will NOT work with this.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 8
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
The orange sled on my Nexus Pro X broke. I could not find one so i designed this one.
It is printed in PETG with the hollow inside facing down, and using minimal supports. The design uses M3 bolts with nuts on the back side of the sled to hold it in place rather than the screws that come out of the original model.
05/13/2026 EDIT: I have confirmed you will need two M3 by 16 mm bolts and two M3 by 18 mm bolts and four M3 nuts to complete the assembly.
I also change the attachment point to be 10mm space picatinny, so that any standard picatinny forward grip could be attached. I then remixed Mighty Shrub's remix pump handle and used it.
https://www.printables.com/model/1694183-adventure-force-nexus-pro-x-pump-picattiny