MMDVM Hotspot case for Raspberry Pi Zero 2 W
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case will hold a Raspberry Pi Zero 2 W with an attached MMDVM hat.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 0
- Views
- 259
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This remix is a case for the Raspberry Pi Zero W being used as a digital hotspot with a MMDVM hat. The particular hats that it was designed for are sold by AURSINC (https://www.aursinc.com/collections/mmdvm-hotspot). It may also work with other hats that have similar layouts.
The stand is used in order to allow air to move from underneath the case. I found that using the stand lowered the on-board temperature reading from 137°F to 133°F.
The Pi Zero attaches to the case by push through pillars that act as standoffs. Mine were fairly tight and the mainboard does not move at all. There is no support built in for the hat, however. If you expect your hotspot to be used in tougher environments, you may wish to add a supporting spacer or standoff to your MMDVM.