MMDVM Hotspot case for Raspberry Pi Zero 2 W
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case will hold a Raspberry Pi Zero 2 W with an attached MMDVM hat.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix is a case for the Raspberry Pi Zero W being used as a digital hotspot with a MMDVM hat. The particular hats that it was designed for are sold by AURSINC (https://www.aursinc.com/collections/mmdvm-hotspot). It may also work with other hats that have similar layouts.
The stand is used in order to allow air to move from underneath the case. I found that using the stand lowered the on-board temperature reading from 137°F to 133°F.
The Pi Zero attaches to the case by push through pillars that act as standoffs. Mine were fairly tight and the mainboard does not move at all. There is no support built in for the hat, however. If you expect your hotspot to be used in tougher environments, you may wish to add a supporting spacer or standoff to your MMDVM.