35 modeli
Enclosure for a 3.5" Nextion Display, Raspberry Pi Zero W, MMDVM Hat modem, stub antenna and TTL. If you want to use some of the more advanced touh screen software displays you will need a USB TTL (I recommend the FTDI ones) which will…
Ideal case for Raspberry Pi 2/3 along with dual MMDVM hotspot. Printing without supports, Infill: 15%. Share your printed model.
MMDVM CASE for some taobao MMDVM board The antenna very near OLED screen minimax dimension,simplest 3D part and easy to print Category: Electronics
MMDVM based HAM radio hotspot. See original project description and differences section (below on the page) for this project. Using https://www.pistar.uk/ software. Note - solder JP1 pins on hat together to be able to upgrade hat firmware…
Case for a MMDVM hotspot board and raspberry pi zero. I used eight M2x8 screws to hold the case together, with four printable spacers. Thanks for checking out my model I hope it helps you, if you enjoy it and want to support me please…
Designed to fit a Raspberry Pi 3b and a mmdvm single hotspot. Hole for a 30mm fan on one side. Air vents keep the rpi running at about 35C in my set up. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Hier ein Gehaeuse fuer eine Hotspot. Verwendet wurde ein Raspberry-Pi 3 A+ und ein Nextion 3.5" Display. Das ganze ist Modular aufgebaut, so dass man das Geraet ohne Display, bzw. mit einem anderen Display verwenden kann. Ich fuege noch…
Hier liefere ich euch ein Gehäuse für einen einfachen MMDVM Hotspot auf Basis eines Pi Zero’s in Verbindung mit einem Duplex Modem. Achtung, dieses Gehäuse ist nur kompatibel mit den neueren Modem-Platinen ab Version 1.3, da diese Boards…
A basic case capable of taking a PiZero 2W and a PiSugar2. Comes with plenty of cooling holes. The lid is just a press fit.
Case and lid for the MMDVM_HS_HAT_DUPLEX MMDVM dual/duplex pi hat that doesn't have a USB port on it. Suitable for this specific board: https://www.amazon.com/dp/B0878WF7HW There are two versions of the main part of the box - one has…
A small case for a dual jumbospot MMDVM hotspot with a raspberry pi zero and a small oled screen. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Ideal case for Raspberry Pi 2/3 along with single MMDVM hotspot. The distance is not mandatory, if you use it, place it on the other side of the MMDVM. Printing without supports, Infill: 15%. Share your printed model.
A case for a Jumob MMDVM dual hat for raspberry pi Zero and a OLED 0.97" screen. The screen is mounted on the lid since many of the screens out there have swapped VCC and GND from what the MMDVM card expects. Needs some M2 and M3 bolts to…
This is a remix of the original MMDVM_HS_Dual_Hat for the Pi 3A with a hole added for an OLED display. I removed the connector for the Nextion display and added the hole for the OLED to the top case. The bottom part of the case is the…
Stand for Raspberry Pi + MMDVM Hat and a Nextion 3.5"-Display. Remixed to the 3.5" for a friend. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: .20 Infill: 20 Filament: [ PLA PLA…
https://www.tinkercad.com/things/57N4fiI7OpX
This remix is a case for the Raspberry Pi Zero W being used as a digital hotspot with a MMDVM hat. The particular hats that it was designed for are sold by AURSINC ( https://www.aursinc.com/collections/mmdvm-hotspot ). It may also work…
A case for the MMDVM hat and Raspberry Pi Zero for your digital hotspot. The components below are needed to build it. Parts List Raspberry Pi Zero ( aliexpress.com ) MMDVM hat ( aliexpress.com ) OLED 1.3" display ( aliexpress.com ) Toggle…
Tired of loose radio nodes cluttering your desk? This 10-inch server blade cleans up your gear and fits perfectly into the LabRax ecosystem. This is a remix of a very well made 10-inch faceplate by George: I kept the mounting slot for the…
I credit desertblade and candrist for the original inspiration for this cse, but I didn't use their models for my design. I reworked this entire design from original geometry using AutoCAD based on my particular MMDVM hat board (which…
Please see the base model for more information. I printed mine in PETG for better heat resistance. A pi can get hot, especially without a fan. Someday, I hope to design a fan attachment. But, the case will also need to be higher because I…
Alternative cover for the MMDVM Dual Hat for RPi2/3 case to accommodate the V1.0 MMDVM_HS_HAT_DUPLEX PCB with an alternative Antennas, screen and LED's placement
Krabička pro MMDVM hotspot s napájením z Li-Ion baterie a UPS modulu. Je použitý čínský modul pro baterii 16340, ale je tam použitý akumulátor z elektronické cigarety, který je rozměrově nižší. Pro originál 16340 článek jsem vytvořil…
Items needed: 4 M3x4x5 heated inserts 4 M3x30mm 2.5 hex bolts 4 Printed spacers (included in files) Also included solidworks files for those capable and able to modify as you wish. :D I used ABS (recommended or similar)
Compact Case for MMDVM Dual Hat (PCB-Only) Give your MMDVM Dual Hat Hotspot the perfect standalone home! This case is designed exclusively for the HS Dual Hat PCB — the Raspberry Pi is not housed inside . I run my Dual Hat connected to…
Alternative cover for the MMDVM Dual Hat for RPi2/3 case to accommodate the V1.0 MMDVM_HS_HAT_DUPLEX PCB with an alternative Antennas, screen and LED's placement
Dual MMDVM 10 Inch Rack Mount I HAD TO CUT HOLE FOR MICRO USB
Compact Case for MMDVM Dual Hat (PCB-Only) Give your MMDVM Dual Hat Hotspot the perfect standalone home! This case is designed exclusively for the HS Dual Hat PCB — the Raspberry Pi is not housed inside . I run my Dual Hat connected to…
I wanted to mount my MMDVM on an IKEA Skadis board. I also wanted it to fit! This model combies some Skadis pegs with the original case design - so it can fit on the board. It also adds 2mm of height to the top so the MMDVM board will fit…
Dual MMDVM 10 Inch Rack Mount I HAD TO CUT HOLE FOR MICRO USB
Changed PCB support bottom -0,5mm Changed PCB support top -1mm Added spacers 11x6mm Mod from https://www.thingiverse.com/thing:2997294 Print instructions Category: Electronics Summary Changed PCB support bottom -0,5mm Changed PCB support…
I added a 40mm snug fit fan-shroud, so everything keeps cool and quiet. Use a 5V 40mm x 20mm fan and plug it into the 3.3V Power-Supply of your Raspberry Pi 3 to run it on a quiet & low RPM. I also used Raspberry Pi heat sinks with a…
Remix of candrist excellent design . I just added cutouts for the OLED and status leds. This is the version I purchased w/OLED: https://www.aliexpress.us/item/2251832815128683.html Assembled using 4x M2.5x22mm or M2.5x25mm screws.…
You need to print the case and lid STLs once and the post STL twice. Default PrusaSlicer settings worked fine for me. This project requires the following additional hardware: * 4 low profile 2.5mm (or 3mm, see note below) threaded inserts…
This Case is designed for use with BI7JTAs Duplex_Mini hotSPOT board with Ceramic Antenna. You need additional 4 screws M2.5mmX10mm
