Fiskars QuickFit tool Wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Fiskars QuickFit tool heads. Print as oriented, mount with screws.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Fiskars QuickFit Toolhead Wall Mount
A simple wall mount for a single Fiskars QuickFit toolhead. Modular by design — print one per tool and line them up however you want on the wall.
Features
Fits all Fiskars QuickFit tool heads (rake, broom, hoe, cultivator, edger, weeder, etc.)
One head per mount — total freedom over spacing and layout
Three screw holes on the back plate for direct wall mounting
Tool head slides on and is held in place by a locating pin that seats into the QuickFit head's internal socket — no click-lock, no moving parts
Installation
Mark the two screw hole positions on the wall.
Drill and plug if needed, then fasten the mount with M4 or #8 wood screws.
Slide a QuickFit head onto the mount — the internal pin aligns with the socket in the head. Lift off to remove.
Printing
Nothing special required. Standard PLA or PETG both work fine. Print with the back plate flat on the build plate — no supports needed.
Notes
If you want a row of tools, just print as many copies as you need and space them by the width of the head you're hanging (typical ~12–15 cm between centers works well).