1 / 1
Qidi Q1 Pro - Mainboard focusing air ducts (80x15mm fan) for steppers, CPU, MCU — image 1

Qidi Q1 Pro - Mainboard focusing air ducts (80x15mm fan) for steppers, CPU, MCU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Qidi Q1 Pro rear panel modifications for better motherboard cooling.

Rating
0 / 5
Likes
4
Downloads
16
Makes
0
Views
162
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

BOM

  • 8015 24V fan

  • 4 x M3 heatset inserts (5mm OD)

  • 4 x M3x20 mm screws (such as ISO 7380)

Optional:

  • 4 x Rubber Screw Damping Nail

  • 1 x 90x90 mm nylon computer case fan dust filter

Printing

For focused duct use a heat-resistant material. ASA or ABS.

Notes

This is a simplified option for those who do not need a quick-access cover, however, the printable parts are not interchangeable.

When installing a protective grille (or other fan shroud) instead of a nylon filter, use longer screws. Ø4 mm holes are not required in this case.

Assembly

Use the dimensions shown in the figure below or the CAD data from the STEP/Sldprt file to mark the holes.

The panel finishing method is up to you. For the fan hole, you can use a hole saw of similar diameter for metal or plastic. Finish the edges with a deburring tool.

Add M3 heatset inserts to the duct.


Assemble the structure using M3x20 screws. Install the nylon dust filter with a rubber screw damping nail. The larger size is chosen to avoid blocking the airflow with the filter frame itself.

Besure to plug in the fan before mounting and securing the back panel. Done!

Tags