Nissan 350Z Pedal Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extenders for the clutch pedal in the Nissan 350Z, meant to make it easier to depress the pedal all the way.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing these in a semi-flexible material, such as 95A TPU or SBS, but with 4+ walls and 25%+ infill. The extension is slid onto the pedal and then held in place by two cable ties.
I have included two versions of every height, one with a texture similar to the original pedal, and one smooth so you can stick some grip tape onto the front.
Now obviously you are 3D printing stuff for your car pedals, so be careful, make sure you can reach all your pedals fine, and you aren't going to get a foot caught on anything while driving, because I am taking no responsibility if you bin your Z while going through the Arby's drive through.
.step included, but Fusion did some real ugly fillets, so be ready.