Dock Adapter - PolyDryer XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an easy to print adapter for the PolyDryer Box XL. It lets you use the larger dry box on the PolyDryer base.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 118
- Makes
- 1
- Views
- 431
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
How It Works:
Insert two of the adapters to the PolyDryer in the same orientation, this insures the top holes are located the correct distance from each other. Place the PolyDryer Box XL on to the adaptors and you are done!
Key Features & Improvements:
Spring Fit: Spring features on the PolyDryer side to lock the adapters to the dryer.
Snug Dry Box Fit: Dry box interface is tight enough to stop airflow but not too tight to make the XL storage bod stick to them.
Sturdy Geometry: Designed with 3D printing in mind, this design utilizes simple geometry for maximum durability and performance with minim waste.
Print Settings:
Material: PLA is excellent and is the material which i used, but PETG or ABS are recommended for more heat resistance while drying for long periods.
Support: No supports required.
Print Orientation: Lay the large flat side down.
Layer Height: 0.2mm works great though you can pick it up to 0.3 for a quicker print.
Infill: The standard 15% works great though i made mine 10% cubic to save time and filament
Notes:
I have one PolyDryer and PolyDryer Box XL so this was designed with my units as a base. If the fit is not acceptable for other users pleas let me know, I will be happy to update the design to accommodate any feedback!