Ideal Door Lock Pin Receiver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Receiver for Ideal Door lock pin to eliminate play and lock more securely
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
My Ideal Door rolltop door has a slide lock pin, but it had a lot of play in it, where the door could move up and down over an inch. I designed this piece to hold the door in an exact position when locked. From the inside, close the door and move the pin to the fully locked position, then put this piece over the pin and screw into place with 2 drywall screws for the door to lock in that exact position. The tall version fits my door perfectly, but I also created a shorter version (8mm less from the wall), and then there are spacers in 2mm, 5mm, and 8mm to adjust the distance from the wall, which should work for most installs. This can be printed in PLA, PETG or TPU, but will require some supports regardless of the orientation it is printed in. I tried to minimize the print material as much as I could.
Also, see other Ideal Door accessorie here: