Ice Cream Holder for Dog Bowl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds frozen ice cream cups over dog bowl so I don't have to. Added the .step file in case your bowl is a different size
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I buy these little ice cream cups for my dog. They are small paper cups about the size of a soda can in diameter. I hate holding it while she slowly licks it all so made an adapter for her bowl. Just drop the ice cream cup in the center and place it over the bowl. Its pretty self-explanatory and should be simple to adjust to your household dog bowl/ice cream diameters in CAD. I have uploaded both .stl and .step in case you need to change the dimensions. I printed in PETG as a PoC but I think I will likely reprint in TPU so it sticks to the metal bowl better.
Here are the specs I printed with but I'd imagine it doesn't really matter. If you have a super aggressive dog maybe increase the infill and add a wall loop. For reference my dog is a small (70lb) German Shepherd Dog.
Flashforge Adventurer 5M 0.6 Nozzle
Inslogic PETG Pro Filament 1.75mm - Pink
2 Wall Loops w/ Alt. Extra Wall ON
15% Infill w/ Adaptive Cubic pattern
Tree Hybrid Supports: printed in orientation of use
Link to the bowls I use is here: https://a.co/d/0fvRMoPi
Bowl dimensions: Top diameter: 185mm; 50mm down diameter: 167mm
If you need to adjust and not familiar with cad, follow these quick steps:
Have your measurements in mm and open the .step file.
On the timeline (often on the bottom), right click on the first step which is the sketch.
Click edit sketch.
Viewing the sketch from the top down, there are 3 large circles and two small circles.
Large circles are (from the outside in) your bowl diameter from the outside edges of the top of the bowl; the inside diameter to the top of your bowl; and the last one is the diameter of the bowl 50mm down (assuming you don't adjust the extrusion height to fit your ice cream cup).
The two inner circles are the diameter of the ice cream cup. I added a inner circle just to be fancy and hold the bottom lip of the ice cream cup but you could remove if you don't like.
Double click on the number attached to the corresponding circle you want to edit. Replace the value with your measurement, and press enter.
Click "Finish Sketch" and the 3D model should have seamlessly adjusted to your specs.