397 models
Introducing the Halloween Spider/Skull Coin , a versatile and fun 3D-printable coin. It uses very little material and can be great for giving out at Halloween or use for your pirate booty! Printing Notes: Recommended print resolution: 0.2…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Treat ball I designed for my cat. The two parts screw together. Fill with your pets favorite treat to keep them entertained for as long as it takes for them to eat them all. Print Settings Rafts: No Supports: Yes Resolution: .2 Infill:…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
This cat toy rolls, spins, and wobbles about quite easily on hard floors, and when printed in PETG, it's incredibly strong and flexible. It holds a couple tablespoons of dry kibble or a few treats inside, requiring either some paw-based…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
Spiritual Retreat
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for one variant
This compact desktop crossbow is designed for harmless fun at home or in the office. It can launch small paper balls for friendly desk battles or shoot treats to your pets during playtime. The model prints easily, assembles quickly, and…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
Yes you did read the title correctly…😉 The design gave me the idea on how to feed the squeeze treats to multiple cats. Usually the missus and I take two cats each and feed by hand but that is still difficult (with eager cats). With this…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for PETGSource material: PET
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Very easy print with 2 options to print (* see also update) : Print-in-place version with the ball. Shake the ball loose after printing (or pause just before printing from the bottom of the treat compartment and break it loose). Version…
This is an improved version of the print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using…
Dog Treat Container - Small A small container for dog treats. Unscrews for filling. Lid rotates to slide open and closed preventing spillage. Why I designed this because, although dogs love all my coat pockets being full of treats, I…
Details: Make using your impulse heat sealer less of a chore with this table. Designed for an 8" impulse sealer with a cutter (4" tall) or a sealer without a cutter (3.25") Four 8mm magnets keep the table securely attached to the impulse…
A Sliding Tile puzzle, to give your cat a true intelligence test. Based on interlocking pieces, this puzzle has 16 hidden chambers to hide your cats favourite treats. The pieces fit together with a small tolerance to allow them to slide…
Features: Smell All the holes around the toy help the cat sense the food inside. They can smell it and wonder how to get it. Sound The many holes inside the ball are not only there to make smell spread, also the sound. even with only one…
Make a fun chase toy for your cat with this two-part print which simply twists together to open & close, allowing you to hide a treat, bell, feather, coins, or other intriguing items inside. Carefully designed so that no supports are…
I created this assistive device to hold treat tubes! If you have any difficulty holding and squeezing the smooth thin tubes of cat treat paste - this device gives a good gripping point and applies even pressure to help you squeeze out…
Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files! Tip Via Stripe Tip Via PayPal A set of 3 easy to…
Description: Add some spooky charm to your Halloween setup with the Pumpkin Treat Keeper – Halloween Candy Bowl 3D Print Model ! This detailed pumpkin-shaped candy holder features an open mouth design filled with Halloween spirit —…
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This little ghost is up to no good and we hope you got candy or a spooky D20 to offer! The LED version will fit a…
Simple cat ball toy, which can also be filled with treats. Made several versions with various numbers of holes. While no cat should be able to destroy the “heavy” variant - be sure, your cat is not strong enough to destroy the “light”…
To screw the Knob on the Lid I use a M3x12 Screw. Bone licenced by https://cults3d.com/en/users/ZachariahSP
This is simple pokeball toy for cats. You fill it up with the treats through the hole. As your cat rolls the ball the treats will fall out of it rewarding the cat. The model consists of 4 parts: two hemispheres, preferably one red and one…
My beta testers really liked the toy, but the grid didn't have a chance. Next step: Glue it to the stand. Printable without supports. The tube is open on one side so you can easily put in the treats. The other side is closed for better…
Challenge your cat with a fun onigiri rice ball-style toy. Perfect for randomly dispensing cat treats. Printed in two parts without supports, the bottom easily twists onto the main body with ~0.2mm wiggle room. Simply twist off the bottom…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 🧁 Cupcake Clicker – The Sweetest Fidget Treat! 🧁 Love cupcakes? Love clickers? Now you can have both! The Cupcake Clicker is a…
Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models! https://makerworld.com/en/@gustav.ferdman Please drop a like of you enjoyed it and don't forget to post your makes! A puzzle…
A fun way to make your dog work for their treats
The original model is entirely glued together, this fulfills a request to make one end of the axle threaded so it can be easily disassembled to refill or replace the pod. Use all other parts (including one axle cap still glued) from the…
To assemble the toy, refer to the product image. Below you will find the list of parts needed to assemble the cat toy. The print orientation should be correct, and I was able to print everything without support and/or brim. The bottom…
This toy is designed to challenge your cats problem solving skills, patience, and paw dexterity. The simple design resists tipping over due to it's wide base but it still fits most build plates and prints support-free! Drop 2-3 of your…
This little toy is pretty simple. You fill the top with a handful of dry treats, screw on the base, and then put it out for your kitty. As they bat at the toy, it'll tip enough to drop a treat. The base should be heavy enough to return…
Print Settings: Material: PLA Layer Height: 0.15 Wall loops: 3 Outer wall: 60 mm/s Infill: 25 % Print all parts vertically (as modeled) No support required Brim recommended for the axel
My cats were having difficulty getting their treats out of the original D20, even after scraping away some of the material with a knife, so my completely unskilled self brought the original into TinkerCad, sized it up by 20%, and expanded…
I remixed the base of Cat Toy - Treat Dispenser Puzzle to use less plastic and reduce print times and print complexity. I also incorporated a spiral to act as a slow-feeder and increase cat engagement. Prints with a 0.4mm nozzle at 0.25mm…
Samhain’s Lollipop from the movie Trick ‘r Treat Approximate Dimensions: 7” x 3.5”
Pumpkin Shaped Treat Bowl for Halloween Candy
This is a remix of two great designs that I improved for the pet poo bag and treat dispenser for the Flexi Dog Leash. Both were great by themselves when I used them, but there were a few issues I had with the original Flexi holder that…
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
Designed this simple but useful pet treat feeder. My cats would bite my wife's hand all the time, so this is handy! They love it! 0.20mm layer height 30% infill (can be more if preferred) Material used: PLA Add one slider to the feeder…
This is a puzle ball for our dog. The basic one was a little too smooth on a hard floor, so I made a version with some ridges.
Trick or Treat Smell My Feet Gnome I hope you have a LOT of teeny tine candy when this mischievous little guy comes knocking on Halloween night! You do NOT want to have to smell his feet! There is no telling where those 10 naughty little…
Scale as necessary, recomended 1mm height.
These are just some cute Halloween style ghost earrings that are trick-or-treating. EDIT : Apparently PrusaSlicer doesn't like the 3MF I uploaded, so I included the STEP file so you can color it yourself if you're having this issue. Note…
Why did I need this Remix? My Cat figured out that flipping these sort of brain teasers is normally the easiest was to get to the food. By connecting it to other pieces it eventually get's to heavy for her to Push over. Also it stops…
Haven't printed it yet. Just uploading it so you guys can have it on time to put your sweets in it. I foresee no big problems printing it (except for the big size, the overhangs and the supports…), and although I dont like that much…
A coin for Trick or Treat Halloween jokes, like a head or tail coin
I really liked the design by kpimmel. I removed the numbers which made it easier and faster to print. It's now better orianted for printing Fixed the size as it was too small for standard regular cat food/treats (120% the original), left…
These parts are needed to make the treat container and cage mount for my series of parrot maze puzzles . You only need to print these once as they can be used with any of the mazes. Printing and Assembly All parts print without support.…
A simple dish treat toy for Bunnies. The sides are rounded to avoid the bunny grabbing it and tipping it over. The holes are not very deep but I find it's the perfect size for a regular dried banana slice or pellet. (Yes, pellets are…
Improvement of the original model. Vylepšení původního modelu.
This is a print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using 0.4 mm nozzle with 0.2 mm…
The design is a ball with treats. For easy refilling of treats, a hole with a thread and a plug. The plug should be printed with 100% infill. We print the balls with a maximum of 30% infill, or less depending on the capabilities of the…
The Dog Lick Mat is a fun and engaging feeding accessory designed to keep your dog entertained while promoting mental stimulation. Featuring textured surfaces, it encourages dogs to lick and savor their favorite treats, such as peanut…
Replaces pieces used in the Nina Ottosson interactive treat puzzle dog toys marketed in the US by Outward Hound https://outwardhound.com/brands/nina-ottosson/ So far this includes The white bone used in the “Dog Brick”, “Dog Tornado”, and…
Spoon for Cat Treats, will fit a paste tube of 165mm x 25mm. Squeezer does have a clearance of 0.2mm and will click in place.
so i saw some models tha have similar shape (i took the idea from them) but i made it with some improvements. like first of all, the base is much bigger and so its much more stable for not to trip over. Second i made a bottle neck on the…
A loop that fits on Adam-M's Dog Treat Container that I made so I can hang it from my dog's leash with a carabiner. Printed out of Prusament PETG and it has served me and my dog well for almost a year now. There are two designs with…
A spooky skull-shaped candy bowl designed especially for Halloween! 💀🍬 The wide-open mouth creates a large space for candy, chocolates, or other Halloween treats, making it a great decoration for your home, party table, office, or…
Halloween - Trick or Treat Decor
.2 layer height 4 perimeters 3 top and bottom layers 15% Grid infill Two parts to make one handle. You will need to print each file twice to make two handles. Very strong! Made to grab and secure fabric to make a handle. Specifically…
We make homemade dog treats for our dog because, for whatever bizarre reason, he doesn't like any of the dozens we've bought from the pet store… I designed this cutter and stamp to quickly and effectively batch cut the biscuits. I added…
A rolling treat dispenser for dogs. I wanted a dog toy that challenges them mentally (to some extend), so I designed this toy (with inspiration from the internet). The roll can also be used without the base. One of my dogs doesn't like to…
A harder version of the treat hole with additional paddles and fake paths in the interior.
Get ready for a frightfully fun Halloween with this 3D model candy bucket! This pumpkin-shaped bucket is the perfect accessory for trick or treating, complete with a convenient handle for easy carrying. Whether you're a spooky ghost or a…
as title fast easy print use cura to split model into parts and print each half add whatever top decoration or holes if desired
🌸 Nibble Treats – Cute Chibi Easter Bunny Bowl 🐰🍬 Bring a touch of cuteness and fun to your home or office with Nibble Treats , a charming chibi-style bunny holding a candy bowl! Perfect for holding sweets, small trinkets, or as a playful…
This remix of the Wim V design incorporates a treat reservoir, making it easy to refill treats so your cat can play more. Pro tip for refill: Turn the top part with the hole inside the container and shake it off, shake it off.
Simple dog bone cookie-cutter with options to create “docking” – the little holes you see in hard-baked goods like crackers. I have found that a liberal bit of vegetable oil or cooking spray helps release treats after cutting. NOTE ON…
Trick or Treat Ghost – LED Tea Light Holder 🎃 Ready for candy duty! This little sheet ghost carries a jack-o’-lantern bucket and brings a playful trick-or-treat touch to your Halloween display. Its hollow body fits over an LED tea light,…
By request these are the files used to produce my make www.thingiverse.com/make:400199 of the original adapted to my front doorbell. Two files for the head sliced to fit my small print area. The third file I created to help it lay against…
A smooth thin ball that you can fill up with treats for you kitty. It's 5cm in diameter and has four equally spaced 1cm holes. I printed mine with black pla and used supports.
A dog tag fashioned in the shape of a claymore mine with the text "FRONT TOWARD TREATS". I have uploaded two versions. A version that is thicker and requires supports on the build plate and a thin version that does not require supports.
A simple container for storing dog treats (snacks). Best used when walking your dog! The cover (lid) closes shut and "clicks" onto the body (container). Use a piece of 1.75mm filament as a hinge. I've included the SolidWorks 2020 files as…
A retake on the original “Cat-A-Pult Treat Toy” I didn't like the way it sat, very asymmetrical :D To use the Cat-A-Pult, simply load the tower with your cat's favorite treats and give it a spin. As the tower rotates, treats will be…
Funny bone-shaped dog tag with the phrase "got treats?"
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
The snack roll activity game turns meal times into fun play times. By randomly dispensing treats during play it provides your dog with mental and physical stimulation. 📌 roll about and treats fall out 📌 can be used as a treat dispenser or…
The Cat-A-Pult Treat Toy is a fun and interactive toy designed to provide your cat with both mental and physical stimulation. The toy is shaped like a small tower and features a rotating mechanism inside that dispenses treats as it…
About: Many years ago, I purchased a very simple version of this kind of treat puzzle made for small dogs. I figured my cats could probably manage it … which they did … a little too easily. I wanted to design a version that was: tempting…
Clinically effective, drug-free and non-surgical treatment for glue ear or otitis media with effusion Reduces the symptoms of glue ear by opening the eustachian tubes allowing the fluid associated with the condition to safely drain away…
A simple cylindrical bottle that dispenses treats when your cat bats it around.
This is an easy and perfect way of showing your Halloween spirit! Printing: 20% infill no supports * If scaling, do not go below 70% or structural integrity will be compromised.
I decided to collaborate for this annual competition with my great friend and artist: Matěj Stehlík . After quick brainstorming, he created this beautiful sketch which I transform into 3D printable model. Check video of the sketch And the…
Here's another spooky model for this month. Last year, I paid tribute to one of my favorite horror films, The Void, by modeling some of the cultists as depicted in the movie. This year, I'm doing the same with Trick 'r Treat and modeling…
2023 12 23: I updated the model to improve the treat locking system.
Celebrate Easter with a bit of blocky charm! Originally designed as a succulent planter for my kids, this cube-shaped pot doubles perfectly as a festive candy tray or tabletop decoration. Inspired by Minecraft characters, it's a fun and…
Features Kibbles dispensed through the push of a button Easy to print and build Minimal electronics Happy puppers See the full build instructions over on Github: https://github.com/sbyrx/kibble-bot Update 2025-03-01: Added Arduino support…
The container is attached by pulling it onto the strap. Moving it forward and backward causes the contents to fall out directly into the palm of your hand. After sufficient loosening, the extreme positions can be locked with a ball spring…
I designed, what we jokingly call “fumble roll” for our cats. Fill the roll with some dry food or treats and let the cat figure out how to get them. I included different dampers, please try how your cat handles the roll. If they get the…
This was requested by my Aunt who loves making frozen treats for her dogs. Very quick print. Plug the small hole of the dog toy… Fill with chicken broth or peanut butter or another dog safe filling… freeze…. remove plug.. give to dog to…
Lost a cone from your Kinetic Sand Scents Ice Cream Treats Playset ? Or just want to expand the ice cream fun? This custom-designed replacement cone is fully compatible with the original set and ready for more sweet, creative play.…
A fun novelty Halloween door sign. Let people know you Trick or Treat Easy to print, can add two or one colour swap(s) if needed. Designed in metric units, adjust in your slicer accordingly. Please post pics of your finished model, give…
Your cat has to roll this puzzle around to get to the treats. Different end-caps and inserts allow for many difficulty levels. Standard PLA settings have been used to print this. For assembly cut 9 strands of filament to about 9.5 cm and…
Features Kibbles dispensed through the push of a button Easy to print and build Minimal electronics Happy puppers See the full build instructions over on Github: https://github.com/sbyrx/kibble-bot
Get ready for spooky fun with this festive Candy Bucket, complete with leaking slime details for an extra creepy touch! Choose between a scary Jack-o'-lantern or a Wicked witch design to match your child’s costume. A little extra treat! 🎃…
Take the treat, put it inside the ball and tighten the screw. This is diamensioned based on a tennisball (6.54–6.86 cm). CAUTION! Use this at own risk. I'm not an expert about dogs or pets in general. Be sure your friend is not able to…
This is a mold you can use to make your own dog treats. Print Settings Printer Brand: Flsun Printer: Flsun V400 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 20% Filament: inland PLA White Category: Pets
Flower Shaped Treats Container Fill with candies, and you have a sweet treat for the mouth and the eyes :) You can add a custom message inside, using your slicer, which makes it a nice gift for your loved ones ☺ Can be used as a planter…
This is a project they made for your cat! I made it so that when the ball rolls around from your cat batting it, the treats inside will fall out and then your cat can eat them.
Thank you for your interest! If you run into any problems be sure to let me know please
