1 / 7
Yoshi Trophy with custom supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It took a couple tries to get the angled foot to print properly.The supported Yoshi is about 90mm tall.I printed it at…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
It took a couple tries to get the angled foot to print properly.
The supported Yoshi is about 90mm tall.
I printed it at 0.2Layers, 10% infill, and a 4 wall thickness .
I will probably bump the infill a bit on the next print.
This model was converted from here: http://www.models-resource.com/gamecube/ssbm/model/5337/
EDIT: 08/15/19 - Ran both files through Meshlab and Netfabb Basic. There were four small holes, but nothing breaking it up into multiple parts.
Category: Toy & Game Accessories