Ruger Mini-14 AR-15 Style Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An AR-15 Style Grip for the Mini-14 with a Folding Stock
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 58
- Makes
- 0
- Views
- 373
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is an AR-15-style grip for the Mini-14 with a Folding Stock.
I didn't really care for the original grip on the Mini-14's folding stock and wanted something a bit more comfortable to use. I could never find a decent replacement, and the ones that I could find were not made correctly, so they wouldn't mount correctly. I finally decided to make my own. This is a combination of a Mini-14 grip and an AR-style grip. I printed it with 100% infill for strength.
If you want it to look like a molded grip, use some 240-grit sandpaper to remove any high spots, seam lines, etc. Then, follow up with 400-grit sandpaper over the entire grip, except for the Checkering. Then, paint it with Semi-Gloss Krylon paint, specifically designed for plastic, as a base coat. Let it dry for about an hour, then mist it by holding the can about two feet away and carefully misting it so it has a little texture. Let the paint cure for at least 2 weeks so it will have a long-lasting finish that is protected from the sun.
Note: I use the Missouri Tactical A2 Grip Plug - Stowaway Grip Plugs with this grip.