SKR V1.3 Case for MPCNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
** Added Bottom that will hold a 15mm thick fan. ** Added lid with V1 Engineering logo I increased the size of the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
** Added Bottom that will hold a 15mm thick fan.
** Added lid with V1 Engineering logo
I increased the size of the hole for the wire entry and shrunk all bolt holes to 2.75mm for direct fit of 3mm hardware. Also created a basic flat top without the TFT mount. I used a separate case to remotely mount the TFT screen for freedom of movement around the machine. This can be found below:
https://www.printables.com/model/169773-bigtreetech-tft35-v2-magnetic-case
Here's a link to my Marlin v2.0.5.3 branch for the BTT SKR 1.3 w/TMC2208 stepper drivers running the MPCNC with Dual Endstops. This is ready to build in PlatformIO.
https://github.com/cmenard/Marlin/tree/MPCNC_SKR1.3_v2.0.5.3
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
Yes
Resolution:
.25
Infill:
50%
Filament: IC3D ABS Grey
Category: Parts