Lattice Basket — Parametric Desk Organiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 15 × 10 × 5 cm open-lattice basket with 45° crosshatch walls, solid corner columns, and a flat rim.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A simple rectangular lattice basket — solid flat floor, four crosshatch diagonal walls at 45°, flat rim beam, and four solid corner columns tying the lattice struts together so the vertical edges print cleanly.
Defaults to 150 × 100 × 50 mm (outside), but every dimension is a parametric knob at the top of the .scad if you want a different size:
floor_l,floor_w— outer footprinttotal_h— outer heightwall_t— wall thickness (struts + rim)strut_w,strut_pitch— lattice densitystrut_crosshatch—truefor X pattern,falsefor parallel onlycorner_post_s— edge columns (4 mm default keeps the corners solid)
Every sloped surface is 45°, so it prints flat on the bed with no supports. Printed here in orange PLA on a Bambu Lab P2S.