Mirror frame or stand for IKEA LÖNSÅS with place for makeup and brushes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use a cheap Lönsas (Lonsas) Mirror from IKEA and turn it into a great Makeup Mirror with this easy to print model!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
A Frame, holder or Stand for IKEA LÖNSÅS. I created it using FreeCad and the result is really practrical.
Can be mounted directly and flush on the wall, because there is a gap for the screw head, so it fits betweens the mirror and the holder.
Print in Place and no supports needed. (Use a brim and make sure adhesion is good)
There is a place to store brushes or other stuff.
It fits the LÖNSÅS perfectly. (There is a gap for that)
PLA is perfectly fine - no fancy material needed.
It is under 23cm high. If you need it to be smaller for you printer you can just size it down a bit in the Z direction.
The Lonsas Mirror is easily available, cheap and still has a good enough quality and therefore it is just a good choice for such projects.
15% Infill with 2 perimeteres is definetly enough.