1 / 4
Mirror frame or stand for IKEA LÖNSÅS with place for makeup and brushes — zdjęcie 1
1 / 4

Mirror frame or stand for IKEA LÖNSÅS with place for makeup and brushes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use a cheap Lönsas (Lonsas) Mirror from IKEA and turn it into a great Makeup Mirror with this easy to print model!

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Share Alike

A Frame, holder or Stand for IKEA LÖNSÅS. I created it using FreeCad and the result is really practrical.

  • Can be mounted directly and flush on the wall, because there is a gap for the screw head, so it fits betweens the mirror and the holder.

  • Print in Place and no supports needed. (Use a brim and make sure adhesion is good)

  • There is a place to store brushes or other stuff.

  • It fits the LÖNSÅS perfectly. (There is a gap for that)

  • PLA is perfectly fine - no fancy material needed.

  • It is under 23cm high. If you need it to be smaller for you printer you can just size it down a bit in the Z direction.

  • The Lonsas Mirror is easily available, cheap and still has a good enough quality and therefore it is just a good choice for such projects.

15% Infill with 2 perimeteres is definetly enough. 

Tagi