1 / 2
Voron bracket ~ Revo Connect
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips directly onto the side of your Voron 2.4 or Trident. To be used with E3D's Revo Connect nozzle holders.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 184
- Makes
- 9
- Views
- 2,079
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For use with ‘Revo Connect’ nozzle holders:
https://www.printables.com/model/158004-modular-revo-nozzle-holders
Compatibility
There are variants for if you are using 4mm or 6mm panel mountings (see Voron compatibility chart below), and there is one variant for each without mounting hole and one with a mounting hole that fits a M3x8 screw. Without mounting hole should work for most, but if the fit isn't snug in you frame, then printing the variant with a hole secures it even more in place.
| Printer | Variant to print (for mounting on side) |
| Voron 2.4r1 | 4mm panel |
| Voron 2.4r2 | 6mm panel |
| Voron Trident | 6mm panel |
Print Settings
- Use standard Voron printing settings found in the Voron manual.
- 💡Tip: Print first layer with only one perimeter for a better looking E3D logo.
Change log
- April 14th 2022: Added a variant with a hole to mount it with a M3x8 screw.
Please let me know if you have any feedback!