1 / 5
PIKO 57431 (Re 482) plate for LED conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for PIKO 57431 (Re 482) locomotive. The locomotive comes with only front-facing bulb…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 46
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
This is a replacement part for PIKO 57431 (Re 482) locomotive.
The locomotive comes with only front-facing bulb lights, so this piece allows conversion to LED lights and also adds rear ligths.
I think it will work perfectly with other PIKO TRAXX locomotives, for example:
- 57536 BR 285
- 57539 BR 285
- 57540 BR 285
- 57541 BR 285
- 57542 BR 285
- 57938 BR 146
- 57939 BR 185
Instructions
You'll need
- this piece (x2). Print in black with protruding parts facing upwards. White SMD LED (x2, one for each side). I used 1206 LEDs Red SMD LED (x2, one for each side). 1k-2k SMD resistor (x4). I used 0805 resistors. thin wires PVA or clear epoxy glue clear fishing lines as light guide. I used a lines of 1mm diameter, but the holes are 2mm, so I stuffed 5 of lines into a single hole. Instead of fishing lines you might do with with clear epoxy or PVA glue or cut acrylic plate. You'll also need a soldering iron and tweezers.
Category: Toys & Games