Improved Tumbler Lid With gasket, Easy Open
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added grooved edges and an easy-opening crank in the middle. Also added a gasket out of TPU or PEBA
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Added grooved edges and an easy-opening crank in the middle. Also added a gasket out of TPU or PEBA.
I also sealed the drum and the inside of the lid (the area inside of the gasket) with epoxy. Hopefully it doesn't leak.
EDIT:
v2 is now available. The first version of the gasket was not enough to prevent leakage. I increased the gasket size and expanded it to go under the threads, increasing the contact area with the rim of the tumbler. I also put a small groove/lip to better retain the gasket. I further thickened the gasket to sit .75mm above the floor of the lid. I think the v1 did not go high enough to make contact with the rim.
For the lid and crank, I increased the size of the cogs for better grip and smoothed the edges so they don't hurt. I can now get excellent grip and torque to open and close the lid. I increased the size of the teeth on the crank and lid interface so it doesn't slip out anymore. I can insert the crank into the interface with the lid, and it holds in place without any glue. Overall, I'd say the cogs are right where I want them. They also clear the wheels just fine on the tumbler base.
I still have to test for leakage with the new gasket. That will likely happen tomorrow as I have to re-epoxy the floor of the new lid. I will update once that is complete.
STEP files included.