1 / 20
Full Size Marvin the Martian Disintegration Pistol — image 1
1 / 20

Full Size Marvin the Martian Disintegration Pistol

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Marvin the Martian Disintegration Pistol by RebelTaz This is a life sized replica of the disintegration ray pistol…

Rating
0 / 5
Likes
22
Downloads
83
Makes
0
Views
807
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Marvin the Martian Disintegration Pistol

by RebelTaz

This is a life sized replica of the disintegration ray pistol used by Marvin the Martian. Some liberties may have been taken in the recreation of this weapon, but...

I have created a decal that can be printed on clear decal paper and applied to the body if you so choose. I have included the decal in multiple formats. Surely one will suit your needs. Just be sure that it is printed at 100% scale for a proper fitment.

There are several option in printing this. You can print each piece as a whole, or if you prefer, I have split some of the pieces in half so that they can be printed flat on the bed and then glued together upon assembly. This is how I printed the handle and the barrel. I decided to print the body solid. At my resolution (0.2mm) I think it gave a better result. Please ignore the lines in the print... I had some issues with my Y axis.

If you want to lay the handle flat on the bed, you will need handle_left and handle_right as well as two of the pin_x2 instead of handle_solid. Similarly, for the body, you will need body_left, body_right and three of the pin_x2 instead of body_solid. pin_x1 is used to align the knob with the prism.

I have also provided the barrel in two configurations - one where the barrel and the ring set are one piece [barrel_withRings] and one where the barrel and the ring set are two separate pieces [barrel_noRings and rings]. If you want to use multiple color filaments, you can use the split version and then slide the ring set down on the barrel and glue it in place as I did.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

Yes

Resolution:

0.2mm

Infill:

10-20%

Category: Props

Tags