Sauce packet stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for open sauce packets, that tip over if you leave them unnatended.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Standard Digital File License
A simple holder to hold your open or closed sauce packets. It also works well in the fridge for storage, even tho, i suggest printing it larger if you plan on fitting more than one packet.
Printed best in PLA / PETG.
I suggest scaling the model up if you plan on storing more than one sauce at a time.
Print Settings:
Layer Height: 0.2mm
Nozzle Size: 0.4mm
Infill Pattern: gyroid
Infill Percentage: 15%
Supports Required: No
Support Type: None
Support Density: 0%
Filament Type: PETG (also works well with pla)
Nozzle Temperature: 240°C
Bed Temperature: 85°C
Brim: No
Estimated Print Time: about 2hrs
Material Usage: 15g
Overall a very simple model, if you have any suggestions, leave them in the comments :D