Sauce packet stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for open sauce packets, that tip over if you leave them unnatended.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Standard Digital File License
A simple holder to hold your open or closed sauce packets. It also works well in the fridge for storage, even tho, i suggest printing it larger if you plan on fitting more than one packet.
Printed best in PLA / PETG.
I suggest scaling the model up if you plan on storing more than one sauce at a time.
Print Settings:
Layer Height: 0.2mm
Nozzle Size: 0.4mm
Infill Pattern: gyroid
Infill Percentage: 15%
Supports Required: No
Support Type: None
Support Density: 0%
Filament Type: PETG (also works well with pla)
Nozzle Temperature: 240°C
Bed Temperature: 85°C
Brim: No
Estimated Print Time: about 2hrs
Material Usage: 15g
Overall a very simple model, if you have any suggestions, leave them in the comments :D