1 / 7
Wheel Bushing for Husqvarna HU700H Push Lawn Mower — image 1
1 / 7

Wheel Bushing for Husqvarna HU700H Push Lawn Mower

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

So, in my continuing line of "no one else will ever need this" crap, I present to you the front wheel bushing set for…

Rating
5 / 5
Likes
5
Downloads
60
Makes
1
Views
728
Reviews
1

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

So, in my continuing line of "no one else will ever need this" crap, I present to you the front wheel bushing set for a Husqvarna HU700H push mower, part number 532439077 (#85 on the diagram, called BRACKET.FRT.AXLE.SUPPORT by the manufacturer). You will need one set for each side. There is only one screw holding this bracket in place - even the diagram only shows one screw per side - but I would highly suggest using a second screw on the other side. The holes are already there, so it just makes sense to screw both pieces.

This prints best in the orientation presented - with supports enabled - and I would recommend a durable material. I used PETG, but maybe even carbon fiber would be good/better? You may want to carefully drill out the screw hole just to make it round since at 0.2mm they don't come out perfectly round. Just don't enlarge it any. I recommend at least 1.6mm walls (4 wall using a 0.4mm nozzle) and a high infill - I used 70% triangle infill.


Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

Yes

Resolution:

0.2mm

Infill:

70%

Filament:

NovaMaker PETG

red

Category: Sport & Outdoors

Tags