Modular hanging system for the IKEA FÖRENLIG 9cm plant pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 decorative versions. +One simple quick print version. Optional plant climbing supports.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the Ikea Förenling small pot (9cm) perfectly but can also be used for other small pots. In that case you need to measure yourself.
Easy print, without supports.
Use them not just for plants! They are fun for holding colorful pencils and small toys and look totally cute in a kids room!
The Multi-cord Anchor used to tie the strings, can be downloaded below
Print Instructions
PLA
0,4 nozzle
2 perimeters (has no fill)
quality print with 0,2mm layer takes 1h20 for the simple model, around 2h for the "melted ice" model and around 3h for the "hearts lace" model with my mk3s+
tiny supports are needed only for the climbing plant support (optional)
Supports look great with fuzzy skin. (green in the photo) But if you apply fuzzy skin, dont forget to exclude the ends (pegs) or they won't fit in the holes.
Assembly
for the simple model you need to use three pieces of cord for hanging
for the 2 decorative models you have more options. Use 3,4 or 6 ropes or 3 ropes if you want to use the climbing supports.
the climbing supports they fit together like a puzzle but i recomend to print the funny face cap to secure them together.
The small half-round caps/pegs serves to cover any holes left open and add a touch of extra color. (optional). They fit perfectly and dont need gluing