Magellan RoadMate Replacement GPS Mounting Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The suction cup mount for my Magellan RV9165T-LM RoadMate GPS busted so I was looking for another way to mount it. I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The suction cup mount for my Magellan RV9165T-LM RoadMate GPS busted so I was looking for another way to mount it. I decided to model it after the dashmount for an old iQue3600 Palm Pilot / GPS. This is the result. It utilizes the original GPS mount and the attached ball-jointed arm, along with the original toothed inserts.
This is assembled like so:
bolt > mount > washer > insert > arm > insert > washer > mount > nut
Once the nut is tightened the arm is locked in position. You can then either mount the base to the dash with double sided adhesive and/or self tapping screws. I left the screw holes small so that you can drill them out to the size needed if you decide to go that way.
Another Sketchup Model - Debunking the Myth that Sketchup is Useless in 3D Printing
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm
Infill:
30% grid
Notes:
I recommend printing with 4 walls to allow drilling the screw holes out if necessary. You may also want to go with ABS or PETG since this will be in the hot sun. Me personally, I went with Raptor PLA, but I like to live on the edge....
Category: Other