OBS Ford Bronco Driver Side Dash Trim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement trim pieces for the driver side of a OBS Bronco.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 69
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
These are replacement left and right trim pieces for the driver side dashboard of some 90's OBS Ford Trucks. I modeled these using the OEM dash panel out of my Bronco so I can't vouch for fitment in aftermarket panels, however I'd imagine a quick re-scale in your slicer of choice can get things copacetic.
There are 2 different styles of insert, V1 style inserts have more of a radius up to the face while the V2 style has a flatter face. All the photos are taken of draft prints that were printed at a 0.28mm resolution so the detail can definitely be a lot finer.
At the moment I have both pieces reprinted in ASA and temporarily attached to the panel with some hook and loop strips until I can decide on a more permanent solution. I hope this can help out a few folks who don't wanna shell out big bucks on metal replacements or roll the dice on used brittle eBay stuff. With the right post processing I feel like these will come out pretty great and last quite a while.
Thank you!