Shield Planks - Lion Crest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Swappable plank set for the Modular Shield Housing Kit. Five planks with a multi-colour lion crest emblem.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Free swappable plank set for the Modular Shield Housing Kit. Five PETG planks with a multi-colour lion crest emblem. For the little ones who think they're king of the jungle and aren't entirely wrong.
Requires the Modular Shield Housing Kit to assemble.
What's Included
5 planks (centre + 2 inner + 2 outer)
Lion crest emblem (multi-colour: black, orange, yellow, brown)
Left-hand and right-hand orientations included
.3MF and .STL (Shield - Orientated) with parts in recommended print orientation. Split to individual parts in your slicer
Print Settings
We recommend PETG for durability.
Planks: 5 perimeters, 5 top/bottom layers, 20% gyroid. Print on their side. Brim recommended. Supports everywhere, with a support exclusion zone on the strap section (bridges easily without supports).
Lion crest (multi-extruder): Multi-colour - black, orange, yellow, brown. Emblem is effectively solid at 1.8mm height. Wipe tower enabled. Reduce purge volumes for same-material swaps. Uses a 0.4mm clearance offset on the lion head for clean colour separation.
Assembly
Friction-fit planks into the housing kit casing. Super glue the lion crest emblem on. Sand mating surfaces with 120 grit before gluing.