Vibration-dampening Wall Anchor for Tables and Storage Racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Great way to reduce shaking on a 3D printer stand.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
This is a vibration-damping wall anchor for tables or storage racks. Printers like having a stable platform, and these anchors are a cheap way to add some rigid support.
Print with tpu, with the side opening down, without supports.
4 walls 15% Gyroid for a stiff anchor
2 walls 10% Gyroid for a soft anchor
Holes are sized for M6 screws and will just fit a standard screwdriver bit. Once you mark where you want your anchor, prepare and/or install the appropriate wall anchor for your wall (i.e. plastic expansion anchors, metal toggle anchor, etc.) Feed the screw through the side opening and afix the tpu anchor to the wall.
Line up your table to the anchor, feed an m6 screw through the opening and affix with a nylock nut.