Olight I3T EOS clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip for flashlight Olight I3T EOS
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Clip for the Olight I3T EOS flashlight. The original was made of metal; here is a replacement you can print yourself.
Designed in two parts for durability. Both parts should be printed in landscape orientation, as shown in the attached .3mf file. After printing, simply apply a drop of CA glue to the clip, slide the arm onto it, and wait a moment for the glue to set.
Then attach it to your flashlight and enjoy the clip :)
If you want to print without using the .3mf file, after adding .stl files to the slicer, perform the “split to parts” operation on "arm" part; then the text will then appear in the object list. Just convert them to "negative part". Unless you don’t want the text :)
My other designs for the Olight I3T EOS flashlight:
My print settings:
0.12mm layer height
only one wall on first layer (or similar in your slicer)
4 walls
25% gyroid infill
variable layer height: 0.29 adaptive