1 / 5
Motorola Moto G Power 2021 Phone Case — image 1
1 / 5

Motorola Moto G Power 2021 Phone Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A case for the Motorola Moto G Power, 2021 version. Printed in PLA. PETG would probably work fine as well.

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
95
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A case for the Motorola Moto G Power, 2021 version. Printed in PLA. PETG would probably work fine as well. I've printed this number of times and I'm pretty happy with it.

File: MotoGPower2021Case_.stl


I added a design for flexible filaments. I've only printed one prototype of this (in TPU). It seems pretty good, however that was not the final design posted here. (I tweaked it a fair bit since, but I'm low on TPU so just posting for now). I'd highly recommend against printing this in PLA, as it's difficult/impossible to get the phone in/out of the case. In any case, I'm less confident in the fit of this design, so if you have success with the TPU STL, let me know and post-up a Make. Thanks!

File: MotoGPower2021CaseTPU.stl

Notes:

Lay it on it's back to print. No support needed. It bridges the opening for the headphone jack without a problem. Takes about 3 hours to print at 60 mm/sec.

(For the TPU version, you might want support at the cutouts, although it seemed to bridge OK on the prototype.)

Category: Mobile Phone

Tags