Boat Water Pump Impeller Removal Tools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tools for the removal of marine engine water pump impellers.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 1
- Views
- 74
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
These levers are for the removal of rubber raw water cooling pump impellers. They are primarily for marine engine water pumps but may have other applications. The aim is to provide a pair of levers which will not damage either the impeller or the bronze pump housing. The use of screwdrivers or other steel implements often cause damage.
Use the levers together on opposing sides of the impeller and lever against the pump housing.
I have designed two styles. Print two of whichever design best suits your engine layout.
A pair of levers will clip together for storage.
Print with the clip "crosses" upward and enable support for the two clip holes on the underside. I used PETG with 4-perimeters which has been fine for my purposes but for tougher jobs you may wish to use PETG-CF etc.
Sorry I don't have any photos of the finished articles at the moment as I've given them all away to friends!