Raspberry Pi Pico LAN Tester
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 3D printed enclosure for my portable Raspberry Pi Pico LAN Tester.
- Rating
- 0 / 5
- Likes
- 165
- Downloads
- 100
- Makes
- 0
- Views
- 3,619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
You can buy the KIT <HERE>
This is the 3D printed enclosure for my portable Raspberry Pi Pico LAN Tester.
The device uses a Raspberry Pi Pico, W5500 Ethernet controller, SSD1306 OLED display, custom PCB, LiPo battery and USB-C charging. The case includes openings for the OLED, push button, RJ45 Ethernet connector, USB-C port and side switch.
The full step-by-step build guide is available on Instructables:
INSTRUCTABLES
## Print Settings
- Material: PLA or PETG
- Layer height: 0.2 mm
- Infill: 15–25 %
- Supports: only if needed
- Hardware: M3 screws and M3 heat-set inserts
## Project Files
The firmware, KiCad files, BOM and PCB files are available on GitHub:
https://github.com/Markuselectronics/Raspberry-Pi-Pico-LAN-Tester